Each of the two compressor units has 4 pistons each and all 8 have new air intake filters. One of the pump fan shrouds has a corner cracked but it holds in place just fine. Gast makes all maintenance parts for these pumps as well including the shrouds, filters, full rebuild kits, etc. From the factory this model is configured for 3 phase 460v.
This unit has been reconfigured for 3 phase 230v (30DTC instead of 30DTD in the model number). Most any industrial control systems place or industrial electrician can reconfigure it back to 460v if needed. I connected it and powered it up a week ago and the pressure has not changed in the tank so no leaks either. I did put a 1/4 pipe plug in the bottom drain hole for testing, it just had an open pipe. You will want to add some sort of drain.
You will need the following info. We have a forklift on site to set it in the back of a truck - no lift gate is needed. On a standard 48x40 inch pallet the overall weight is about 475lbs and it is about 40 inches tall. You will need to determine for your end if you will need a lift gate, if residential, etc... If you would like to inspect the compressor please send me a message.
The item "Gast Duplex Compressor 8HDM-30DTD-M853 2x 8HDM-10-M853 pumps, 60 gal REDUCED" is in sale since Tuesday, July 7, 2020. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Other Air Compressors". The seller is "mixmansc" and is located in West Columbia, South Carolina.
This item can't be shipped, the buyer must pick up the item.